DCE05356,项号:29-34 GR-CH204 TYPE:GR,FORM:CH353，0.69Mpa,65*50mm, 125l/min,1000r/min， NO：08350A GR-CH602S 流量400L/MIN 转速：1500RPM 序列号：98005A type:GR FORM CH353 0.69MPA ITAYA GR FORM CH204 HEAD:5kg/c㎡ bore:25*25 capacity=40 rpm:1450 NO:98513a date:1998 MUSASHINO 油泵齿轮泵 MUSASHINO 油泵齿轮泵 MUSASHINO 油泵 齿轮泵
XY Manipulator for Ultra-High Vacuum ●Features ■ Aluminum alloy composition, lightweight design. ■ Ion plating process is APPlied to mirror finished aluminum flange according to the ICF standard. ■ Specifications suitable for Ultra-High Vacuum . ■ Capable of versatile transmission movement and positioning when used in combination with Linear Motion Feedthrough and Rotary Motion Feedthrough. ■ Clamp mechanism included.
A Standard products Contents - A2 Vacuum flanges
■ CrN surface treated aluminum alloy ICF Flange Type 6-way Cross and Cube ●Features ■ Capable of extremely low Outgassing rate of 10-11 Pa?m3/sec?m2(10-13 Torr?l/sec?cm2)less than for stainless steel using only a 150℃ low-temperature baking treatment. ■ Extra light-weight design (1/3 that of stainless steel) ■ The flange seal surface is protected by high-hardness CrN (ion plating). ■ Flange material is A2219 (high-hardness, heat-reSIStant alloy).
A Standard products Contents - A3 Screws and Nuts for Vacuum
■Screws and Nuts for Ultra-High Vacuum ●Features ■ Use these PARts for Ultra-High Vacuum application. ■ The material is 304 or 316L stainless steel. Outgassing is minimized because degassing is applied to parts after special surface treatment. ■ To prevent gas from remaining in blind holes, a venting hole is provided at the center of the Screws. ■ Parts are ready to use because the package was filLED with N2 gas.