HQZ-200气动水井钻机
water well drilling rig
气动水井钻机是一种高效多功能的钻凿设备，它主要适用于钻凿水井、农业灌溉井、地源热泵井及其他用途的 井孔，尤其适用于山区和岩石地层的取水工程。该钻机可在不同地层上进行穿凿工作，最大钻孔直径可达300mm。
Full hydraulic drilling rig is an efficient multi-functional drilling equipment, which is mainly applied in drilling wells, irrigation wells, ground source heating pump wells and boreholes for other purposes, especially for mountain and rock formation well projects. The rig can be drill in different layers, and the maximum hole diameter is up to 300mm.
主要特点
1、该钻机釆用新型液压技术，配套大扭矩液压马达回转以及大直径液压油缸推进。
2、两级空滤以及引接压缩空气的进气设计，延长柴油机的使用寿命，独特的泵组设计方便维修，降低维修成本。
3、集中控制的液压操纵台，方便操作。
4、该系列钻机可选装履带底盘、轮式底盘，越野性能强。
5、独立的模块设计，高油缸支腿可使钻机方便地装在卡车上，增加其机动性。
6、两档回转和推进速度可满足在土层和岩层的不同穿凿需要。
I. The rig adopts new hydraulic technology, equipped with high torque hydraulic motors and a large-diameter hydraulic cylinder for propulsion. And branded engines supply power the hydraulic system;
2， The connection of two air filter and air intake design prolongs the engine’s life. Unique pump design facilitate maintenance and reduce maintenance costs.
3, Centralized hydraulic control console, easy to operate.
4, This series of drilling rig can be put on crawler chassis or wheeled chassis, off-road performance.
5， Independent module design, high cylinder leg rig can be easily mounted on a truck, increase its mobility.
6， Two gears of the rotation speed and feeding speed, can meet the different needs of drilling in soil and rock layers.

全液压水井钻机技术参数
钻机型号Model QY100 QY200
整机重量Weight (kg) 1800 6000
整机尺寸 Dimension (mm) 3000*1200*2000 5300*2100*2500
行走速度 Walking Speed (km/h) 0〜2 0〜2
配备动力型号Engine Model YN27 4102GBZ
动力参数 Engine parameter 37kW/2400rpm 76kW/2400rpm
离地间隙 distance from ground (mm) 250 250
冲击器 DTH hammer DHD360 DHD360
爬坡能力（°) Climbing angle 20 20
钻孔深度 Drilling depth (m) 120 200
工作风压 Air pressure (MPa) 1.05〜2. 46 1.05〜2. 46
耗气总量Air consumption (m3/min) 16 〜30 16 〜30
钻杆直径 Drill pipe (mm) φ76/φ89/φ102
076/089/ 0102 φ76/φ89/ φ102
钻杆长度 pipe length (mm) 1500 3000
钻孔(钻头)直径)rill bit (mm) φ115 〜φ254 φ115 〜φ254
推进力 feeding force (kN) 27 35
提升力 lifting force (kN) 40 75
回转器转速 Rotary speed (rpm) 慢速 22 22
快速 177 17
17
回转扭矩Torque (N*m) 3500 5500
以上参数如有改动，恕不另行通知•（Any change of the parameters mentioned above can be made without prior notification.)

联系人：刘经理
扣扣：2881248850
电话：：17686192368 电话：0537-2881989